E-flite P-40 Warhawk 300 ARF - Manual (Page 10)

10 E-flite P-40 Warhawk Assembly Manual
Propeller and Spinner
Removal and Replacement
Required Parts
Fuselage assembly Propeller
Spinner
Required Tools
Nut driver: 5mm Canopy glue
 1. Carefully pull the spinner forward to remove it
from the motor. It will take a small amount of force
to remove.
 2. Use a 5mm nut driver to remove the nut holding
the propeller on the motor.
 3. Remove the washer and propeller from the motor.
If you are checking the rotation of the motor, now is
the time to do so while the propeller is removed.
 4. Before installing a new propeller, make sure it is
installed in the correct direction. One side will have
a hex that keys to the motor. Make sure it installed
with this hex toward the motor.
 5. Slide the propeller on the motor shaft.