E-flite Ultra Stick 25e ARF - Manual (Page 29)

Final Assembly
Required Parts
• Fuselage
• Wing
• Battery
• Battery hatch
• 6-32 x 1" socket head bolt (2)
• #6 washer (2)
• Hook and loop tape
• Hook and loop strap
Required Tools and Adhesives
• Hex wrench: 7/64"
• Hangar 9 Digital Servo & Rx Current Meter (HAN172)
 1. With the aircraft fully assembled, install the
battery into the battery compartment. Secure the
battery using the hook and loop tape and a hook
and loop strap.
 2. With a servo meter we recommend you test the
BEC circuitry to ensure the system can handle the
current draw of the radio system. Once hooked
up between the ESC and receiver, continually
deflect all servos checking the current draw.
You will want to verify this is within the BEC
limitations.
29