E-flite PT-19 450 ARF User Manual

Page 7

Advertising
background image

7

E-flite PT-19 ARF Assembly Manual



4. Carefully remove the servo cover from the

wing panel.



5. Position the servo on the servo cover. Center the

servo arm in the cutout in the servo cover

as shown.



6. The servo arm will also be flush with the edge of the

servo cover as shown when it is positioned properly.



7. Once the servo is properly positioned, use a

pencil to trace the servo tabs and servo edges on

the servo cover.



8. Check to make sure the servo mounting block

does not overhang the edge of the servo cover. If

so, you will need to adjust the position of the servo

to make sure both blocks will be on the servo cover.

Advertising
See also other documents in the category E-flite Air equipment: