E-flite Apprentice 15e RTF with DX5e Radio - Manual (Page 24)

24 E-flite Apprentice Assembly Manual
 5. Check the movement of the elevator with the radio
system. Pushing the elevator/rudder stick forward will
make the airplane elevator move down on the Mode 1
transmitter.
Checking the Rudder (Mode 1 and 2)
 6. Mode 1 (Rudder/Elevator on left stick): Center the
rudder stick. Thread the clevis in or out on the rudder
pushrod until the rudder is aligned with the fin as shown.
Mode 2 (Rudder/Throttle on left stick): Confirm the
rudder stick is in the down/throttle off position. Thread
the clevis in or out on the rudder pushrod until the rudder
is aligned with the fin as shown.
Centered
Right—Thread clevis out
Left—Thread clevis in