BT 1500 - Manual (Page 23)

Quartet 1500 User Guide ~ 3rd Edition ~ 27th November ’01 ~ 4197
20
To check your outgoing
message
You can check and play
back your current outgoing
message at any time via
your Quartet 1500 base unit
or the handset.
Using the base:
Press the ANS ON/OFF
button.
The prompt will announce
either:
• “Your outgoing message
is...” and play your
outgoing message.
Or
• “Answer off”. If prompt
is “Answer off”, press the
ANS ON/OFF button
again and the prompt will
announce the current
outgoing message.
continue to hold the button
while recording your own
OGM. When you have
finished speaking, release
the button.
The prompt will announce,
“Your outgoing message is...”
and then play your message.
To record via the handset:
Pick up the handset.
Press the SCREEN/MENU
button. You will hear the
main menu announcement
from the handset earpiece.
Press the 8 button for the
outgoing message menu.
Press the 4 button and then
select the outgoing message
that you wish to record over
(e.g. press 1, 2 or 3).
The prompt will announce
the selected OGM.
Then press the 3 button
to record your new OGM in
its place. The prompt will
announce, “Please speak after
the tone. To end recording,
press
#”.
After the tone, speak your
outgoing message into the
handset. Press
# when you
have finished. You will hear
a long beep, (throughout
recording r will flash on the
base unit display).
4
GHI
3
DEF
Note
Press the SCREEN/MENU button
to return the handset to Standby.
8
TUV
Screen
Menu
The prompt will announce,
“Your outgoing message is”
and then play your message.
The display will flash p and
after playing your message
you will hear the menu
once more.
Ans on/off
Ans on/off