E-flite Taylorcraft 450 ARF - Manual (Page 32)

32 E-flite Taylorcraft ARF Assembly Manual
 13. Secure the cowl to the fuselage using four 2mm x
8mm sheet metal screws.
 14. Secure the propeller to the motor.
Final Radio Installation
Required Parts
Fuselage assembly Receiver
Y-harness Hook and loop tape
8-inch (204mm) hook and loop strap
 1. Plug the speed control, rudder and elevator leads
to the appropriate connectors of your receiver. Plug a
Y-harness to the connector for the ailerons.
 2. Use hook and loop tape to secure the receiver under
the radio tray inside the fuselage.