First person view (fpv) system instructions, Headset battery charging, Headset charger warnings – E-flite FPV Vapor RTF W/ Headset User Manual

Page 9: Led indications

Advertising
background image

9

EN

Li-P

o BA

TTER

Y P

ACK

7.4V 760mAh

CAUTION: If at any time during the charge

process the battery pack becomes hot to the touch,

unplug the battery immediately and discontinue the

charge process.

Low Battery Warning
The headset will beep when the battery voltage is low.

As the headset battery voltage continues to drop, the

beep rate will increase. Recharge the headset battery

as soon as possible.

1. Connect the charger to the wall outlet the LED will

turn green.

2. Connect the battery to the charger the LED will

turn red.

3. When charging is complete the LED will turn green.

4. Disconnect the battery from the charger and

unplug the charger from the wall outlet.

Charging a fully discharged (not over-discharged) 7.4V

760 mAh battery takes approximately 75 minutes at

the charger’s 500mA charge rate. The LED goes out

when the charge is complete.

Headset Battery Charging

LED Indications

CHARGING

(Red)

......................................

MAX CHARGE

(Solid Green)

.......................

The battery charger included with your product has

been designed to safely charge the Li-Po battery.

CAUTION: All instructions and warnings must

be followed exactly. Mishandling of Li-Po

batteries can result in a fire, personal injury

and/or property damage.

• By handling, charging or using the included Li-Po

battery, you assume all risks associated with

lithium batteries.

• If at any time the battery begins to balloon or

swell, discontinue use immediately. If charging

or discharging, discontinue and disconnect.

Continuing to use, charge or discharge a battery

that is ballooning or swelling can result in fire.

• Always store the battery at room temperature in a

dry area for best results.

• Always transport or temporarily store the battery

in a temperature range of 40–120º F (5–49° C).

Do not store the battery or model in a car or direct

sunlight. If stored in a hot car, the battery can be

damaged or even catch fire.

• Always charge batteries away from flammable

materials.

• Always inspect the battery before charging.
• Always disconnect the battery after charging, and

let the charger cool between charges.

• Always constantly monitor the temperature of the

battery pack while charging.

• ONLY USE A CHARGER SPECIFICALLY DESIGNED

TO CHARGE LI-PO BATTERIES. Failure to charge

the battery with a compatible charger may cause

a fire resulting in personal injury and/or property

damage.

• Never discharge Li-Po cells to below 3V under

load.

• Never cover warning labels with hook and loop

strips.

• Never leave charging batteries unattended.
• Never charge batteries outside recommended

levels.

• Never charge damaged batteries.
• Never attempt to dismantle or alter the charger.
• Never allow minors to charge battery packs.
• Never charge batteries in extremely hot or cold

places (recommended between 40–120° F (5–49°

C)) or place in direct sunlight.

First Person View (FPV) System Instructions

Headset Charger Warnings

CAUTION: Only use a charger specifically

designed to charge a Li-Po battery. Failure to do so

could result in fire, causing injury or property

damage.

CAUTION: Always disconnect the battery

from the charger immediately upon completion of

charging.

Advertising
This manual is related to the following products: