GBC T200 Thermal Binder - Manual (Page 4)


Special notice
Thank you for choosing a GBC Binding Machine. We aim to
produce quality binding machines at an affordable price, with
many advanced features to enable you to create excellent
results every time. Before using your machine for the first time,
please take a few minutes to read through this guide.
Specifications
GBC ThermaBind T200
DIN A4
310 x 21mm
20mm
5 minutes
Fixed – 40 seconds
Yes
100W
300W
230V 50 Hz
1kg
365 x 135 x 85mm
CE
Format
Binding channel size
Maximum binding thickness
Warm up
Binding cycle
Safety shut off
Energy consumption – standby
Energy consumption – binding
Power supply
Net weight
Dimensions
Approvals
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS
IMPORTANT TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION
MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY
MESSAGES. READ THESE MESSAGES CAREFULLY.
m
General safeguards
• Please read the instructions and keep them safe for future
reference.
• When using the machine, always ensure the machine is on a
flat and stable surface.
• Do not touch the heating plate of this machine, as it may be
hot.
• Keep out of reach the reach of children at all times.
• Do not tamper in any way with the internal mechanisms of
this machine.
• Do not close the lid when the machine is in use.
• Do not immerse in liquid.
Service
• Within a warranty period of 2 years from the date of
purchase, ACCO Brands Europe will at its own discretion,
repair or replace defective original parts. The warranty
specifically excludes faults or breakdown occurring as
a result of accidental or intentional misuse or failure to
operate or maintain the machine if accordance with the
manufacturer’s instructions.
Warranty Period
2 years (parts & labour) Model
GBC ThermaBind T200
Maintenance options
• If you would like to extend your warranty coverage beyond
the stated manufacturers period, please consult your local
ACCO Brands Europe reseller for options.
Setting up
1 Remove your Thermabind T200 from the packaging. Check
that the Rating Plate on the machine corresponds with your
electricity supply.
2 Place the Thermal Binder on a flat stable surface. The plug
should be inserted into a near and easily accessible outlet.
3 Lift the lid of the machine into the upright position, before
switching the machine on. (diag.1)
4 Press the ‘On/Off’ Switch (A) on the right side of the
machine. A red LED light indicates that the machine is on
and the heating plate is warming up.