GBC P3000 ProClick Pronto - Manual (Page 6)

Proclick Pronto P2000/P3000
6
Instructions for use
Please read these instructions carefully and keep them in a safe place for later reference.
Getting started
• Unpack the Proclick ® Pronto ™ and place on a secure, stable
table.
• Plug the power cord into an appropriate power receptacle.
• To turn the machine “ON” press the ON / OFF (I/O) switch
(fig. 1) located at the rear of the machine. An audible beep
will be heard.
Punching paper (P3000 only)
Insert the document to be punched into punch tray (fig.2),
align paper to the left of tray and press “PUNCH” button.
Note:
• Maximum 15 sheets of 80gsm paper can be punched at a
time.
• Do not attempt to punch more than 2 PVC covers at a time.
Binding
a
Insert document into document sizer for the machine to
identify the document size (see fig. D1)
The machine identifies the document in 3 different sizes,
“Small”, “Medium” and “Large”.
a
Once the Proclick ® Pronto ™ has measured the document
thickness, the display will indicate the correct Click size to
load into the machine. The example shown in fig. D2
indicates “Small” under “Insert correct Proclick
®
Pronto ™ Cartridge size”.
The system will allow you to bind small documents with
larger Click sizes.
Insert the appropriate Proclick ® Pronto ™ Cartridge into Click
slot (written side towards you).
a
In order to hide the Click seam of a completed document,
you must place the back cover face to face on top of the
front cover before you insert the document into the “BIND”
sections (fig.3, A=back cover, B=front cover, C=body).
Insert punched document into the binding slot (punched
side first)
A blue light will illuminate to indicate the document has
been properly inserted.
a
Press “BIND” to bind your document and remove the
document after you hear a BEEP.
Additional documents can be bound without resizing, if
binding books are of the same document size. The Proclick
®
Pronto ™ will time out to the first step if it stays idle for 2
minutes. You will need to resize your document to continue.
Editing your document (fig. 4)
The Proclick ® Pronto ™ has a special Click opener tool with
which you can unbind the bound book for editing.
To unbind a bound book, just insert the wedge of the Click
opener tool into the loops of the Click and pull forward in a
sliding action. This opens the Click allowing you to edit the
documents and manually re-close the Click.
Warranty
Operation of this machine is guaranteed for 1 year from date
of purchase, subject to normal use. Within the guarantee
period, GBC will at its own discretion either repair or replace
the defective machine free of charge. Defects due to misuse
or use for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs or alterations made by persons not authorised by GBC will
invalidate the guarantee. It is our aim to ensure that our
products perform to the specifications stated. This guarantee
does not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.
Register this product online at www.gbceurope.com
d1
d2
d3
d4