Brady 3481 - Manual (Page 39)

29
4.0.3 Quick Test Mode: Print Test Labels
þ Note: The Quick Test Mode functions are disabled while processing data
from communications interfaces until the Host Timeout value expires.
Œ
The DOWN ARROW key scrolls to the previous
test function.
•
The UP ARROW key scrolls to the next test
function.
Ž
The ENTER key will change the selected test label
quantity of 2, 100, 1000, or 9999 (except the
‘Configuration Label’, quantity of one). Holding
down the key scrolls quantities.
•
The ESCAPE key will exit the Quick Test Mode
without printing.
•
The TEST key will print the selected test label at
the selected quantity. During test label printing,
this key also functions as a cancel key (the printer
will prompt you for confirmation before
cancellation occurs).
+
You can program a time delay between the printing of test labels using
the ‘Print Test Rate’ feature; see Section 4.1.7.