GunVault MVB 500 - Manual (Page 8)

- 7 -
Security Cable
Loop the security cable around a secured object.
Run one end of the cable through the eye of the other end and pull tight around
object.
Place the loose end of the security cable through the gap on the left side of the
unit as shown in picture and close the lid to secure.
Technical Support
If you have followed the above steps carefully and still have a problem operating your
MicroVault Biometric, phone GunVault Technical Support. Almost all problems can be
solved within minutes over the telephone.
800-222-1055
Requirements for Return & Repair
If possible, do not return your MicroVault Biometric safe to your dealer. Instead, call
GunVault Technical Support Department. GunVault products delivered without a
pre-arranged Return Authorization Number may be returned unopened, at owner
expense, and fees may accrue.