Maintenance, Requirements for return & repair – GunVault HV 5900 User Manual

Page 12

Advertising
background image

- 12 -

Any interruption of power will cause the computer memory to reset to the factory code: one, two, three,

four. If this occurs, anyone who enters the one-two-three-four code will gain access to the safe and its

contents.

Warning: Never attempt to plug in a battery charger of any kind. Fire or explosion of batteries could

result. Never use rechargeable batteries of any kind in a GunVault safe. Their power characteristics

are not compatible with the safe.

The AC/DC power supply specified is NOT a battery charger; it is an external power supply to be used

only when batteries are installed.

11. Maintenance

Low Battery Warning Indicator

The low battery indication on standard models is seven red flashes and seven soft beeps when the valid

access code is entered. This indication means that insufficient power is available from the battery tray-

the unit may continue to work normally, but the batteries must be changed immediately. Check battery

tray and battery tray installation, connections, orientation of batteries, and condition of batteries. You

cannot program your safe while the light is blinking

Battery Replacement

Warning: Replace the batteries once a year regardless of whether or not the low battery

indication is observed.

Always check carefully to be sure that all of your batteries are facing in the correct direction. One

battery facing the wrong way will lower the power output of your battery tray, potentially causing

unreliable operation.

IMPORTANT: We recommend that you use ONLY Duracell AA batteries. Eight (8) AA batteries

are required. NEVER attempt to use rechargeable batteries – they will not work!

Lubrication

It’s a good idea to lightly coat the door hinge spring and door latch-loop with quality oil at least once a

year. Never spray anything into the latch mechanism.

.


12.

Requirements for Return & Repair

If possible, do not return your GunVault safe to your dealer. Instead please call GunVault Technical

Support which can solve most problems over the telephone, making return unnecessary. GunVault

delivered without a pre-arranged Return Authorization Number may be returned or destroyed.

Advertising
This manual is related to the following products: