GunVault GV 3000 - Manual (Page 6)

- 5 -
Installation of Optional Security
Cable
Hint: A pair of needle-nosed pliers will be useful for installing the hitch pin.
“Cut-outs” are provided on both sides of the DrawerVault to permit attachment of
the Security Cable.
a) First, loop the end of the security cable through the eye and around a
stationary object.
b) Then, insert the threaded mount through the hole in the safe.
c) Hold the mount in place while you slide the star washer over the threaded end
inside the safe.
d)
Spin on the nut and tighten “finger tight.”
e) Insert the Hitch Pin through the hole in the threaded mount, to ensure that the
nut cannot come off
.
Technical Support
If you have followed the above steps carefully and still have a problem operating
your GunVault, phone GunVault Technical Support. Almost all problems can be
solved within minutes over the telephone.
800-222-1055
Requirements for Return & Repair
If possible, do not return your GunVault safe to your dealer. Instead, call
GunVault Technical Support, most problems can be solved over the telephone,
making return unnecessary. GunVault products delivered without a pre-arranged
Return Authorization Number may be returned unopened, at owner expense,
and fees may accrue.