Bosch WTMC6321US - Manual (Page 14)

14
Program selection
For optimum drying results your dryer
offers several program groups and
additional options.
Select the required drying program
from the program table according to
the examples (see page 16).
Automatic programs
There are automatic programs for
different types of textiles
(Regular/Cotton, Permanent Press,
Mix).
Regular/Cotton
Permanent Press
The program sequence of automatic
programs is controlled via sensors. The
duration of the program depends on
the measured degree of moisture in the
laundry and on the selected degree of
dryness (e.g. Damp dry or Extra dry).
Mix programs
There are mix programs (Very dry,
Regular dry) for mixed loads different
types of fabrics.
i If you choose an Automatic or Mix
program the display shows the
estimated time remaining
immediately.
Special programs
The programs Heavy load, Wool care
and Short are made for special
application cases.
The duration of the Wool careĆ
Program must be adjusted via the
SelectĆButton.
Possible Settings: 0:00ć2:30 h in
10 min. steps.
i Dry woolen or woolĆrich textiles
with dryer rack only!
Time programs
Time programs run at specific
temperatures
- High for temperature
insensitive textiles
- Medium for temperature sensitive
textiles
- Air Fluff/No heat for extreme
temperature sensitive textiles.
The duration of the drying process
must be adjusted via the SelectĆButton.
Possible Settings: 0:00ć2:30 h in
10 min. steps.
i If you choose a program with
variable time (time programs, wool
care) the display starts to flash.
You have to set the time.
i Dry woolen or wool-rich textiles
with dryer rack only!
Additional options
i Before setting additional options,
choose a program with program
selector!
SymĆ
bol
Function Possible
setting
Sets the delay
start time of the
dryer
(Start in .. hours!)
0-12 h
(0.5 h steps)
Extra care
(more gentle than
Delicates/low
temp.")
On/Off
ChildĆproof lock
(only effective
while the
program is
running)
On/Off
Precision setting
of the desired
degree of
dryness
0, 1, 2, 3
Volume of the
end signal and
the damp dry
signal
Off,
continuous,
maximum
Coordinates the
remaining time
display to the
spin speed at
which the
laundry was
previously spun
in the washing
machine
400
600
800
1000
1200
Select the option to be changed with
the Menu" button. Press the button to
jump to the next option on the display.
The active symbol starts flashing.