Belkin F5D7634-4A-H User Manual
Page 61
59
G Wireless Modem Router
sections
table of contents
1
2
3
4
5
7
8
9
10
6
ManUallY ConfIGURInG neTWoRK adaPTeRs
Mac os up to 9x
In order for your computer to properly communicate with your Router, you will need to change your Mac computer’s TCP/IP settings to DHCP�
1
Pull down the Apple menu� Select “Control Panels” and select
“TCP/IP”�
2
You will see the TCP/IP control panel� Select “Ethernet Built-In” or
“Ethernet” in the “Connect via:” drop-down menu
(1)�
3
Next to “Configure”
(2),
if “Manually” is selected,
your Router will need to
be set up for a static IP
connection type� Write the
address information in the
table below� You will need
to enter this information into
the Router�
4
If not already set, at “Configure:”, choose “Using DHCP Server”�
This will tell the computer to obtain an IP address from the Router�
5
Close the window� If you made any changes, the following window
will appear� Click “Save”�
Restart the computer� When the computer restarts, your network
settings are now configured for use with the Router�
(1)
(2)