Brinkmann 2500 - Manual (Page 28)

Step 15
Place the porcelain coated heat
shields on lower level of grill body
assembly directly above burners.
Step 16
Place porcelain cast iron cooking
grills on support ribs directly
above porcelain heat shields.
Step 17
Place warming rack in slots above
cast iron cooking grills.
27
1. Read and follow all warnings and instructions in owner’s manual before lighting.
2. Open lid before lighting burner.
3. Make sure all control knobs are in the OFF position.
4. Select the burner to be lit. Push and turn the control
knob of that burner to HIGH.
5. Press the electronic igniter and hold for 3-5 seconds to light burner.
6. If burner does NOT ignite immediately, turn control
knob to OFF, wait 5 minutes to allow gas to
dissipate and repeat lighting procedure.
7. Repeat Steps 4-6 for lighting each burner. Always use electronic igniter for lighting each burner.
8. Refer to owner’s manual for match lighting procedure.
9. For assistance, call 1-800-527-0717.
10. To turn off, turn control knobs clockwise until it locks in OFF position.
GRILL LIGHTING INSTRUCTIONS:
FOR OUTDOOR USE ONLY
Warming Rack
Cooking Grills
Porcelain Heat
Shields