Bissell 3554 - Manual (Page 8)

8
To maintain peak vacuum efficiency, you should check the
Filtrete Vacuum Filter Bag weekly, and replace it when it is
no more than three-quarters full.
Never reuse a Vacuum Bag.
1. Remove front canister panel by pressing Panel Latch,
as shown. Pull panel forward to remove.
2. If bag is three-quarters full (or more), place your
fingers behind the collar and gently slide it from the
dirt tube. Discard the Vacuum Bag.
3. Press the Handle Release Pedal and lower cleaner to
fully reclined position (laying the handle on the floor).
4. Fold top of new bag forward and grasp both sides of the
cardboard collar with your hand. Put your fingers
through the hole in the collar to create an opening for
the dirt tube.
5. Match the bag with the tabs at the back of the Canister,
and angle to place the collar under the tabs.
6. Gently push the bag onto the dirt tube until the entire
collar touches the back of the Canister.
7. Position canister panel so bottom tabs fit into slots.
Push panel closed until it snaps into place.
Replacement Bags
Use only BISSELL Style 4 bag made with Filtrete ™ technology
from 3M (#32031, package of 2) in your BISSELL Upright
Vacuum Cleaner.
You may purchase the Bag
at your local retailer,
with the order form in this User’s Guide,
or by calling
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. – 7 p.m. EST
Saturday
9 a.m. – 2 p.m. EST
or from the BISSELL website –
http://www.bissell.com
To maintain maximum performance from your BISSELL
cleaner, perform these simple maintenance checks periodically.
Routine maintenance
Replace Vacuum Bag
Tip:
Vacuuming
new carpet or
fine powders
such as drywall
dust can rapidly
fill the Vacuum
Bag, so check it
more frequently.
WARNING:
To
reduce the risk of injury
from moving parts, and/or
electrical shock, turn Power
Switch OFF and disconnect
polarized plug from electrical
outlet before servicing.
For average household use, follow this maintenance schedule:
Every Week:
Check the Filtrete Vacuum Filter Bag (page 8)
and Filtrete Exhaust Filter (page 10)
Every Month: Check the Drive Belt and Rotating Brush (page 9)
Every 6 Months: Replace the Filtrete Exhaust Filter (page 10)
Panel
Latch