HF scientific Micro1000 Laboratory Turbidimeter - 0-10,000 NTU User Manual
Owner’s manual
Advertising
Table of contents
Document Outline
- Cover
- DECLARATION OF CONFORMITY
- Table of Contents
- 1. SPECIFICATIONS
- 2. Overview
- 3. Safety
- 4. Routine Operation
- 4.1. Measurement Principle & Methodology
- 4.2. Grab Sample Measurement (Routine Measurement)
- 4.3. Pour Through Sample Measurement (Optional Accessory)
- 4.4. Flow Through Sample Measurement (Optional Accessory)
- 4.5. Dry Air Purge System
- 4.6. Using the Security Access Feature (Good Manufacturing Practice [GMP])
- 5. Calibration Procedures
- 6. Instrument Configuration (SETUP) Mode
- 6.1. Setting the Scale
- 6.2. Setting the Ratio Mode
- 6.3. Selecting Display Resolution
- 6.4. Configuring the Security Code
- 6.5. Setting up the RS232 Port (Printing Function)
- 6.6. Setting the Calibration Interval
- 6.7. Setting the Date (Year, Month and Day)
- 6.8.Setting the Time (Hours and Minutes)
- 6.9. Exiting the setup mode
- 7. Troubleshooting
- 8. Routine Maintenance
- 9. Contacting the HF scientific, inc. Technical Service Department
- 10. Accessories and Replacement Parts List
- 11. Glossary
- 12. Warranty