Human Touch HT-140 Massage Chair - Manual (Page 4)

humantouch.com
4 5
ENGLISH
Unpack the box
1. Unfold the chair
Remove all packaging materials from the
chair. Pull up on the backrest to unfold the
chair to an upright position. The backrest
locks into place automatically.
2. Attach the backrest pad
Attach the top backrest pad flap to the top of the
backrest. Smooth the two bottom flaps under the bottom
of the backrest. Attach each side flap to the side of the
backrest. All flaps attach using hook-and-loop fasteners.
5. Attach the head pillow
Flip the flap on the back of the headrest up and over the
top of the chair. Attach the head pillow to the flap using
the hook-and-loop fasteners. Adjust the head pillow
height for maximum comfort.
4. Attach the seat pad
Align the seat pad over the chair base with the
contoured side of the pad toward the backrest. Attach
the seat pad to the chair base, using the hook-and-loop
fasteners.
3. Power on
Plug the power cord into a grounded 120-volt power source.
Turn the master power switch (on the bottom center of the
backrest) to On.
get ready
Chair Seat Pad Backrest Pad Head Pillow
Your Human Touch massage chair requires some
simple assembly (no tools required). Just attach
the backrest pad, the seat pad and the head
pillow, and you’re done!