Human Touch HT-275 Massage Chair - Manual (Page 4)

humantouch.com
6 7
ENGLISH
Unpack the box
4. Attach the head pillow
Attach the head pillow to the top of the backrest
using the hook and loop fasteners.
Chair Head Pillow
get ready
Your Human Touch massage chair requires some
simple assembly (no tools required). Simply
plug it in, power it on, attach the head pillow,
and you’re done!
The power panel on your Human Touch
massage chair offers a convenience
outlet, which enables you to plug in a
low-wattage appliance such as a lamp or
laptop. Do not plug in appliances that
use wattages higher than 1 AMP, such
as a vacuum or a hair dryer.
2. Power on
Turn the master power switch to On (located on
the bottom center of the chair back).
3. Raise the backrest
Use the remote control to raise the
backrest to an upright position.
1. Plug it in
Plug the power cord into a grounded power source.