Customize massage intensity, Care and maintenance – Human Touch iJoy-2580 Robotic Massage Chair User Manual

Page 7

Advertising
background image

1. Open the zipper on the front of the backrest.
2. Insert or remove the massage-softening pad from
the pocket, as desired.
3. Close the zipper.

Your Human Touch massage chair may have
zippers that are closed with a plastic Security Tie.
Cut the Security Tie with a nail clipper or other
suitable instrument. Take care to not cut the
chair upholstery.

The massage-softening pad softens the massage intensity. For a stronger massage,
remove the massage-softening pad.

customize massage

intensity

Replacement massage-softening pads are available
from Human Touch, for an additional charge.

To experience the full power of
Human Touch

just remove the

massage-softening pad from
your chair. But keep it handy,
in case you want to replace it
in the future.

To keep your product working and looking its best, please follow these simple care guidelines.

care and

maintenance

Cleaning:

1. Be sure to unplug before cleaning.
2. Do not use benzene, thinner or any other solvents on your massage chair.
3. Remove dust on the backrest or armrest with a vacuum cleaner.

Maintenance and Repair:

1. The mechanisms of this product are specially designed and constructed to be maintenance free. No periodic lubrication or servicing is required.
2. Your chair should only be serviced by an authorized service center.

Storage:

1. When not in use for a long period of time, we recommend that the chair be covered, the power lead be coiled and that the unit be placed in an environment free of dust and moisture.
2. Do not store near heat or open flame. Do not leave this product exposed to direct sunlight for long periods of time. This may cause fading or damage.

Miscellaneous:

1. Foreign objects should not be inserted between the massage nodes or the unit housing.
2. Care should be taken not to overload the unit.

WARNING:

This product is equipped with a thermal resetting protection device. This is an added safety feature to protect you and this product from overheating. If the product should

suddenly stop and will not start, turn the main power switch, located on the back of the product, to off and do not operate the product for at least 30 minutes. Failure to turn the product off
may result in the product starting unexpectedly when the product cools.

4. If the backrest or armrests become dirty, wipe with a damp cloth, then a dry cloth.
5. Common upholstery cleaners may be used for tough stains.
6. When cleaning the remote control or around the power switch, use a dry cloth only.
Never use a damp cloth to clean the controller or power switch.

Fabric Care:

To maintain your Human Touch product in optimum condition, dust it frequently and/or vacuum it with a soft brush vacuum extension. S

ōfSuede

products can also be brushed

with a suede brush. Wipe with a slightly damp cloth as necessary. For tougher stains on non-leather products, use a mild detergent mixed with water. Leather products should be
wiped down occasionally with a leather furniture cleaning solution.

WARNING:

Be sure to test any cleaning solution on a small, inconspicuous part of the product to ensure that the color does not fade prior to using the solution on the entire product surface.

humantouch.com

10

11

ENGLISH

Advertising