Human Touch PC-075 Perfect Chair - Manual (Page 4)

humantouch.com
4 5
ENGLISH
get ready
Your Human Touch ® Perfect Chair ® requires some simple assembly. Just
attach the headrest frame, pads, arm caps, and head pillow, and you’re done!
5
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
2. Secure the body pad.
1. Raise the chair to an upright position.
ATTACH THE HEADREST FRAME
For your convenience, and to better position the chair for the
remaining assembly, plug in the chair, then use the electric recline
lever to adjust the chair to an upright position.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
With the arc of the headrest frame pointing toward the back of the chair, slide
the two ends of the headrest frame into the open tube ends at the top of the
backrest frame.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
2. Remove the headrest frame screws.
3. Insert the headrest frame into the backrest frame.
4. Replace the headrest frame screws.
UNPACK THE BOXES
Body pad
Arm cap (2)
Head pad Head pillow
Phillips-head
screwdriver
Headrest frame
Chair frame
Head sock
CAUTION: Plug the chair into an appropriate power source.
Be sure that the power cord lies beneath the mechanics
located underneath the chair.