Human Touch PC-095 Perfect Chair - Manual (Page 4)

humantouch.com
4 5
get ready
5
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame.
2. Secure the body pad.
UNPACK THE BOXES
Chair frame Headrest frame
Head sock Arm core
Body pad Arm cap (2)
Head pad Head pillow
3/16-inch
Allen key
Phillips-head
screwdriver
Lumbar pillow
Some pad sets include a separate
lumbar pillow instead of the upgraded
body pad with built-in lumbar support.
Your Human Touch ® Perfect Chair ® requires some simple assembly. Just
attach the headrest frame, pads, arm caps, and head pillow, and you’re done!
1. Raise the chair to an upright position.
ATTACH THE HEADREST FRAME
For your convenience, and to better position the chair for the
remaining assembly, plug in the chair, then use the electric recline
lever to adjust the chair to an upright position.
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
With the arc of the headrest frame pointing toward the back of the chair, slide
the two ends of the headrest frame into the open tube ends at the top of the
backrest frame.
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
2. Remove the headrest frame screws.
3. Insert the headrest frame into the backrest frame.
4. Replace the headrest frame screws.
CAUTION: Plug the chair into an appropriate power source.
Be sure that the power cord lies beneath the mechanics
located underneath the chair.
ENGLISH