Human Touch PC-086 Perfect Chair - Manual (Page 4)

5
humantouch.com
4
Unpack the box
get ready
Your Human Touch Perfect Chair requires some simple assembly. Simply
fold the seat pad forward, slide the backrest pad onto the chair frame,
connect the heat and air connectors, reinstall the seat pad, and you’re done!
5
Headrest pillow
Chair Backrest pad
Headrest frame
1. Detach the flaps that secure the top of the seat pad to the
chair frame (Fig.1).
2. Lift the seat pad upward and fold it forward, to expose the
chair canvas (Fig.2).
3. Open the chair canvas zipper to expose the air hose
connectors (Fig.3).
1. Plug the chair into an appropriate power source.
2. Push down on the recline lever to incline the chair to the upright position.
3. Unplug the chair.
Partially remove the seat pad
Incline the chair
1. Using a Phillips-head screwdriver, remove the two screws from the back of the headrest frame.
2. With the headrest frame positioned so that the headrest can tilt forward, slide the two ends of the headrest
frame into the open tube ends of the chair frame.
3. Replace the two headrest frame screws and secure them using a Phillips-head screwdriver.
Install the headrest frame
(Fig.2)
Seat pad
Chair canvas
ENGLISH
(Fig.1)
Flap
(Fig.3)
Hose connectors