JK Audio RIU-IP - Manual (Page 2)

2
The RIU-IP is a remote control interface designed for use with the
JK Audio innkeeper 1x/1rx, innkeeper 2 or innkeeper 4 digital
hybrids. This unit contains a web server which allows the user to
send and receive control data through their web browser. RIU-IP
can be connected to the user’s computer NIC card for direct
control, to a switch or hub for network control, or to an Ethernet
port with internet access for control from anywhere in the world.
The Remote Port is a 10-conductor RJ-50 that connects to the
Remote jack of your JK Audio innkeeper 1x/1rx, innkeeper 2 or
innkeeper 4.
The RS-232 Interface is used only as a debug port at this time.
Please contact our Technical Support department for more
information.
The IP/Ethernet port is an 8-conductor RJ-45 that connects to your
computer’s NIC card, to your network switch or hub or to an
Ethernet port with internet access. There are two bi-color LEDs on
this port that indicate data transfer.
Introduction
Features
11
Control Connection: RJ-45 Ethernet port
Digital Hybrid Connection:
RJ-50 (36” cable included)
RS-232 Serial Connection: DB-9 (9600, 8, N, 1)
Size:
4.7” x 3.5” x 1.125”
Weight: 1
lb.
Web browser compatibility:
Firefox, versions 1.5 (or higher)
Internet Explorer, version 6.0
(or
higher)
Google Chrome
(Note: If you experience problems with the web browser, please try
a different one)
Contents of the package as shipped:
RIU-IP
(1) 36” 10-pin cable with RJ-50 connectors
(1) Flash chip for innkeeper 2
(1) Flash chip for innkeeper 4
User Guide
Specifications