JK Audio THAT-2 - Manual (Page 6)

6
FAQs
?
How do I use a microphone with the THAT-2?
!
THAT-2 needs a “Line level” signal to send audio
down the phone line. You will either have to use a
microphone pre-amplifier or a mic mixer.
?
I have everything connected correctly. Why can’t
the caller hear me?
!
Check the setting of the A-B-C switch (See page 4).
Also, you cannot use the speakerphone function on
your telephone during your recording. THAT-2 ac-
cesses the audio through the handset cord. With the
speakerphone turned on, there is no audio going
through the handset.
?
I'm using THAT-2 for interview recording and
playback over the telephone. Every time I press
in the gray button I get a loud squeal and feed-
back. How do I fix this?
!
Try changing the setting of the ABC handset selector
switch. If the handset type is not set correctly you
could get the feedback you are describing. Trial and
error works best to find the right handset type but this
info also may help. Handset Types:
•
A=Electret
•
B=Dynamic
•
C=Carbon