K-array KT2-KT2C - Manual (Page 7)

KT2 - KT2C - KTL2 - KTL2C
REV A 7
Read these instructions - Keep these instructions - Heed all warnings
5. SafETY INfORMaTION
WaRNING
• Install the speaker only in a location that can structurally support the weight of the unit. Doing
otherwise may result in the unit falling down and causing personal injury and property damage.
• Professional loudspeakers are capable of producing extremely high sound levels and should be used
with care. Hearing loss is cumulative and can result from levels above 90dB if people are exposed for an
extended period.
• Do not operate the speaker for an extended period of time with the sound distorting. This is an
indication of malfunction, which in turn can cause heat to generate and result in a fire.
• Never stand close to loudspeakers driven at high level.
• Suspending the system should only be done by qualified personnel following safe rigging practices.
Secure fixings to the building structure are vital. If in any doubt, seek help from architects, structural
engineers or other specialists.
• No naked flame sources such as lighted candles should be placed near the device.
• Do not attempt to disassemble the unit. The unit contains no user serviceable parts.Repairs should be
performed only by factory trained service personnel.
6. UNPaCKING
Each K-array amplifier is built to the highest standard and thoroughly inspected before leaving the factory.
Upon arrival, carefully inspect the shipping carton, then examine and test your new amplifier. If you
find any damage, immediately notify the shipping company. Only the consignee may institute a claim
procedure regarding the system’s electronic equipment.
CAUTION
• Choking Hazards . This device contains small parts, which may present a choking hazard to small
children. Keep the device and its accessories away from small children.
• It is important that loudspeaker systems are used in a safe manner.
•
Do not make repairs yourself . Do not open the device, it contains potentially hazardous voltage. Never
attempt to disassemble, repair or modify the system yourself. Disassembling the unit may cause damage
that is not covered under the warranty. The device contains no user-serviceable parts.
Repairs should
only be performed by factory trained service personnel.