Piccolo – K-array Piccolo User Manual
Page 13
Piccolo
13
rev.C
A)
XLR balanced inputs. These two inputs accept balanced, low impedance audio signals
which allow the use of long cable runs (>10mt), without losing the quality of the signal.
B)
RCA unbalanced inputs. These connections are the standard for home devices
such as CD/DVD readers, portable devices, personal computers, etc.
C)
RCA unbalanced outputs.
D)
USB Remote Control plug for Remote Management via K-Framework software.
E)
Power plug.
F)
Left channel audio power output. Connect to the Left mid-high range speaker.
G)
Subwoofer audio power output. Connect to the subwoofer.
H)
Right channel audio power output. Connect to the Right mid-high range speaker.
I)
Main Volume Knob. To turn the system on and off, push the knob down until
it clicks. When Piccolo is on, a soft white light will filter out from under the knob,
highlighting its frame, the position pointer, and three equally spaced reference points.
Turn the knob clockwise to increase the volume and counterclockwise to decrease the
volume. N.B. The last part of the volume knob’s range provides an extra gain of
10dB, useful for low volume sources.