Fixture assembly – Kino Flo 4Bank DMX (BAL-457) User Manual
Page 4
Fixture Assembly
The 4Bank fixture is comprised of a removable Louver, Reflector and Lamp Harness.
The Louver and Reflector are held in place with Velcro fasteners. The Lamp Harness
is secured by means of a ¼ turn fastener and two clips.
The Harness wiring is color-coded. The same color-code must match at each end of
the lamp for proper operation.
To Release the Lamp Harness
Remove the harness from 2 clips located under the reflector. Rotate the ¼ turn
fastener clockwise to release harness.
The lamps can operate independent of the fixture
allowing them to be built into sets or custom soft boxes
or hand-held as a single tube for an eye-light.
WARNING: Always use safety-coated lamps to avoid
injury if lamp breaks.
4Bank Harness
Lamp Harness Color Codes
Red
Yellow
Black
Blue
4