Kino Flo Diva-Lite 401/201 & 400U - Manual (Page 8)

8
Mounting Procedures
Baby Offset Arm
Mounted on a baby
stand.
MTP-B41F
Kino Offset w/
Baby Receiver (16mm)
The Baby Offset Arm (MTP-B41F) allows fixtures to mount on the center of a stand or
it can also be under slung from a baby stand to use as an up light.
A 180 degree turn loosens the orientation of the mount.
A right turn tightens the mount.
The tension on the lock lever may be adjusted by pull-
ing the handle away from the mount. This disengages
the handle from the screw mechanism and allows the
lever to be reoriented.
You can also use a screwdriver to adjust the tension.
Pull back on handle and adjust screw.
Mounted to pipe grid. Note: When hanging in a
studio, loop a safety cord
through the metal ring
provided on the back of
the fixture.