Kino Flo Vista Single - Manual (Page 6)

6
Operates 3 Methods
1) Complete Vista Single Fixture w/ Louver
2) Vista Single Harness w/ Reflector
(Plastic shell removed)
3) Vista Single Harness only
Fixture - Assembly/Disassembly
To remove harness from plastic fixture,
pull the retractable locking pin on the fixture.
Slide the harness base away from harness
alignment pins.
Note: When placing harness in fixture, align the
harness base first before centering locking pin.
The reflector is held in place with velcro fasten-
ers. To remove the reflector, lift up from the
lamp base side.
To re-attach the reflector to the lamp harness,
first insert the narrow indent of the reflector
under the lamp clip. The copper grounding
spring leaf should make good contact with the
reflector. Then affix to lamp base side.