Kino Flo Blanket Light 6X6 - Manual (Page 4)

The Blanket-Lite should travel with lamps
preloaded.
1) It is recommended to mount the
frame between two stands. Tilt
the top edge of the frame over
the open shipping case. Pull the
Blanket-Lite straps out of the box
leaving the Blanket-Lite in it’s
case.
2) Line up Blanket-Lite straps with
the black Velcro on the pipe
frame. Line up the straps’ red
line with the red arrow of the
tube. This ensures lamps are
evenly spaced out within the
pipe frame. Tighten loop down to
the pipe frame.
3) Tilt the frame up thereby lifting
the Blanket-Lite out from the
case.
4) Once the Blanket-Lite has
cleared the case, loop the straps
around the lower portion of the
pipe frame.
5) Hook the ratchet to the other end
of the strap.
4