Kino Flo Flathead 80 (BAL-410) - Manual (Page 5)

5
Mount Plate Operation
Place the long edge of the Louver (LVR-I80-S) into the lower channel
containing a set of leaf springs. Press down on the Louver and slip the
upper edge of the louver into the upper channel of the fixture.
To remove reverse the procedure.
Align the center pin of the Mounting
Plate (MTP-K81) to the center hole
on the mating plate. Rotate plate
clockwise until the four shoulder rivets
drop into the receptacle. A locking pin
will snap into place when the plate is
properly seated.
To remove the plate, pull up on the
locking pin and reverse the mounting
procedure.
The Flathead 80 is designed to operate on a Junior stand,
hang from a Junior pipe hanger or mount directly to a set wall.