Kino Flo Kamio Kit Kam 6E - Manual (Page 7)

7
Mounting Ballast
Mounting Bracket, MTP-141, is required to mount the ballast to a baby pin.
Loosen thumbscrew on the MTP-141 sufficiently to allow the flange to insert
into the track on the underside of the ballast.
MTP-141
Baby Shoe Adapter, MTP-141S, is used to mount the Ballast to a camera
equipped with a hot shoe receptacle. Slide the flange of the MTP-141S into
the hot shoe receptacle on the camera. Lock the pin by screwing down the
thumbscrew.
MTP-141S
An optional Baby Mount w/ ¼” Screw (MTP-141P) is used to mount the
Kamio Ballast to cameras equipped with a ¼” screw hole instead of a hot
shoe. Another mount option is the Ballast Clamp with Baby Pin ( MTP-141C).
Both can be used with the MTP-141.
MTP-141P
MTP-141C
Mount the BAL-149X to the baby pin as shown.