Knog BEETLE - Manual

FIT
2.
Remove batteries by pushing plastic
component carefully out of silicone body
1.
For optimal use do not mix old and
new batteries note: Use compatible
batteries with the following IEC (CR 2032)
4.
Replace batteries, being sure that the
positive and negative poles are correctly
aligned as per markings on light
5.
Replace battery/LED body inside silicone
body, ensuring silicone fits well around
plastic casing
6.
Your Beetle will fit around handle-
bars and most seat posts
3.
Remove plastic lid to remove batteries.
Press to turn On/Off
and to scroll through
flashing modes