Krell 707 Evolution - Manual

Evolution 707
Thank you for your purchase of the Krell ® Evolution 707. The Evolution 707 is a state-of-
surround sound preamp/processor with remote control and dual-zone capabilities, fully uti-
lizing the latest in video displays and audio/video source components. This component
features a full complement of advanced Krell technologies technologies including: discrete,
complimentary, class A, direct-coupled circuitry. Proprietary Krell technologies include:
Krell Current Mode
TM , Evolution CAST TM inputs and outputs, a custom 1080p video scaler
and HDMI TM 1.3 encoder. The Evolution 707 also incorporates a bi-directional RS-232 port
and RC5 control to ensure compatibility with third party controllers, also allowing software
upgrades via Flash memory for future format or design enhancements.
A new, easy to access on-screen menu system available from all video outputs all the time
makes customization a snap. The Evolution 707 features Dolby Digital Surround EX, Dolby
Digital 5.1, DTS 6.1 ES DTS 5.1, DTS NEO:6, and Dolby Pro Logic II processing; Dolby
TrueHD and DTS HD Master Audio lossless surround formats over HDMI
TM 1.3; and nine
proprietary Krell Music Surround modes.
The Evolution 707 must be placed on a firm, level surface where it is not exposed to dripping, splash-
ing, or excessive moisture.
The ventilation grids on the top and bottom of the Evolution 707 must be unobstructed at all times dur-
ing operation. Do not place flammable material on top of or beneath the preamplifier.
Before making connections to the Evolution 707, ensure that the unit is in stand-by and the associated
components are in mute or stand-by mode as well. Make sure all cable terminations are of the highest
quality, free from frayed ends, short circuits, or cold solder joints.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE AN Evolution 707.
Two people are needed to remove an Evolution 707 from its shipping box safely and easily.
The Evolution 707 weighs 49 lbs (22 kg).
1. Place the shipping box right side up, near the installation area.
2. Open the shipping box. You see:
blue packing foam
cardboard flaps containing cutout handles for lifting
1 Evolution 707 wrapped for shipping
1 accessory box containing:
1 AC power cord
1 12 VDC (12 V trigger) cable
1 Evolution 707 hand held remote control
2 AAA batteries for the remote
1 T-10 wrench
1 Quick Setup Guide and literature packet
3. Remove the accessory box from the accessory box well and set it aside.
4. Locate the cardboard cutout handles. The front and back of the surround preamp/
processor face the cardboard cutout handles.
5. Position one person at the front of the surround preamp/processor and one person at
the back of the surround preamp/processor, facing the cardboard cutout handles.
6. Each person grabs a pair of cardboard cutout handles and simultaneously lifts the sur-
round sound/processor straight up, out of the carton.
7. Place the Evolution 707 in a safe location and remove the protective plastic wrapping.
Krell Industries, Inc. • 45 Connair Road • Orange, CT 06477-3650 USA
TEL 203-298-4010 • FAX 203-891-2028 • E-MAIL [email protected]
WEB SITE http://www.krellonline.com
SURROUND
PREAMP/PROCESSOR
WITH HDMI
TM TECHNOLOGY
Quick Setup Guide
INTRODUCTION
UNPACKING
WARNINGS
This product complies with the
EMC directive (89/336/EEC)
and the low-voltage directive
(73/23/EEC).
Save the shipping box and all
packing materials. If you need
to ship the Evolution amplifier
in the future, repack the
Evolution 707 in its original
packaging to prevent shipping
damage.
Krell Evolution 707 1