Nipros LVM-89W - Manual (Page 2)

Connect the HD component video input signals to the HD/Y, HD/B-Y, and HD/R-Y connectors by BNC cables.
And set the INPUT select button to the COMP 1 position.
Connect the HDMI video signal to the HDMI connector by a HDMI cable.
And set the INPUT select button to the HDMI position.
1
2
Monitoring the HD component video signal
3 Monitoring the HDMI video signal
HD/Y
HD/B-Y
HD/R-Y
CMP IN
CMP OUT
TALLY IN
MONI IF
DC 12V IN COLOR INPUT RGB MARKER
MONO
16:9
4:3
PEAKING
LVM-89W
HD/Y
HD/B-Y
HD/R-Y
CMP IN
CMP OUT
TALLY IN
MONI IF
DC 12V IN COLOR INPUT RGB MARKER
MONO
16:9
4:3
PEAKING
LVM-89W
MONI IF
DC 12V IN
(DC power)
MONI IF
DC 12V IN
(DC power)
HD/Y
HD/B-Y
HD/R-Y
HD component
video signals
HDMI video signal
HDMI
( rear )
COMP 1 position
HDMI position
COMP 1
HDMI
■Connection/Use
Connect the Camera Adaptor to the MONI IF connector by the 6-pin cable VC-450.
And set the INPUT select button to the CVBS 2 position.
Connecting with the Camera Adaptor
HD/Y
HD/B-Y
HD/R-Y
CMP IN
CMP OUT
TALLY IN
MONI IF
DC 12V IN COLOR INPUT RGB MARKER
MONO
16:9
4:3
PEAKING
LVM-89W
MONI IF
CVBS 2
Composite video signal
Tally signal
DC power
CVBS 2 position
PS-470 IF OUT
LS-700 IF OUT
ES-500 MONITOR
OUT
Camera Adaptor
6-pin cable VC-450 6-pin connector
■Specifications
Size
8.9 inch-type 8.9 inches : Viewable area measured diagonally
Resolution
Effective Pixels 1024(H) x 600(V) x 3(RGB)
Output
VBS(Composite) OUT
Input
DC XLR 4-pin (male)
VBS(Composite) IN
Monitor I/F Mini 6-pin x1
Tally IN BNC x1 : DC 2 to 4 V=GREEN, DC over 4 V=RED (Front and Rear, Both OFF/L/H Selectable)
General
Weight approx. 600g
Dimensions (WxHxD) 217 mm x 149 mm x 35 mm
Power requirement DC 12 V (10V - 16V)
Power consumption approx. 8W
Operating temperature
Storage temperature
BNC x1: 1Vp-p, 75Ω
BNC x1: 1Vp-p, 75Ω (NTSC/PAL/SECAM auto detective)
BNC x3 : 1Vp-p, 75Ω
+32 to 104 F (0℃ to 40℃)
-4 to 140 F (-20℃ to 60℃)
Universal Head
Height approx. 52 mm
Weight approx. 60g
HD Component IN (HD/Y, HD/B-Y, HD/R-Y)
( 196(H) x 115(V) mm )
(DC IN, VIDEO composite IN, TALLY IN)
HDMI HDMI x1 (HDMI signal input)
Tally indicator Front 2（GREEN and RED), Rear 2（GREEN and RED) (Both OFF/L/H Selectable)
Accessories
Operating Instructions/ Universal Head
Features, design and specifications are subject to change without notice. NOTE
MONI IF (6-pin) Pin assignment
MONI IF
DC 12V IN
1 DC 15 V (G)
2 NC
3 NC
4 DC 15 V (+)
DC 12V IN (XLR 4-pin) Pin assignment
1 GND
2 +12V IN
APPROX. 650mA
3 SG
4 VIDEO IN 1Vp-p
5 TALLY IN 0V=ON
6 NC
Monitoring the composite video signal
Connect the composite video input signal to the CMP IN connector by a BNC cable.
And set the INPUT select button to the CVBS 1 position.
HD/Y
HD/B-Y
HD/R-Y
CMP IN
CMP OUT
TALLY IN
MONI IF
DC 12V IN COLOR INPUT RGB MARKER
MONO
16:9
4:3
PEAKING
LVM-89W
CMP IN
Composite
video signal
MONI IF
DC 12V IN
(DC power)
CVBS 1 position
CVBS 1