OSD Audio PA-90 - Manual (Page 3)

1. Read these instructions.
2. Keep these instructions.
3. Read all warnings.
4. Follow all instructions.
5. Do not use this appliance near water.
6. Clean only with dry cloth.
7. The Equipment shall be operated in open area.
8. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
9. Do not install near heat sources such as radiators, heat registers, stoves, or other
appliance (including amplifiers) that produce heat.
10. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
11. Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the appliance.
12. Only use attachments or accessories specified by the manufacturer.
13. Unplug the appliance during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the appliance has
been damaged in anyway, such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the appliance, the appliance has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. Use only with the cart, stand, tripod bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
This appliance shall not be exposed to dripping or splashing water and no object filled with
liquids such as vases shall be placed on appliance.
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet ne
contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.
Both main plug or main switch disconnect device instruction is accepted.
The mains switch is used as disconnect device and to completely disconnect the apparatus
from mains supply, the mains switch must be switched to “OFF” position and the mains switch
of apparatus should not be obstructed OR should be easily accessed during intended use. In
addition, the location of mains switch on the apparatus and its function shall be described.
Le commutateur du secteur est utilisé pour déconnecter le système. Pour déconnecter
complètement l'appareil de l'alimentation, le commutateur du secteur doit être positionné sur
«OFF». Le commutateur du secteur ne doit pas être obstrué ou doit être facilement accessible
pendant son utilisation.
S3125A S3125A