Brinkmann 4 Burner Gas Grill - Manual (Page 28)

Step 12
Attach the right side table
assembly to the right side of the
grill body. Insert four M6 X 10mm
bolts (silver) into both right legs
halfway. Place right side table
assembly over bolts and slide
toward front of grill, then tighten
securely. Fasten right side table
front panel to grill body with one
M6 X 10mm bolt (silver).
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on “Leak Testing” in
this manual for proper
procedures.
Step 13
Insert tank lock wire through two
small holes in cart base as
illustrated.
27