Bogen BCWR Receiver - Manual (Page 10)

Specifications
BCWR Receiver:
Mode
Infrared Frequency Modulated
Receiving Channels Dual-Channels A & B
Carrier Frequency Ch. A: 2.0 MHz; Ch. B: 2.6 MHz
Audio Frequency Response 60 Hz-
12 kHz
S/N Ratio > 90 dB
Audio Mix Output 400 mV
Range (line-of-sight) Up to 30 ft.
Controls Power ON/OFF (front); Ch. A and B Volume (rear)
Connectors IR Sensor Coaxial-type Jacks, Ch. A/B (rear);
AC Power input jack (rear);
Audio Mixed output RCA-type Jack (rear)
Power Requirements
16V AC, 600mA (via AC adapter)
Power Consumption 8W
Dimensions (W x H x D)
10.6" x 2" x 7.4"
Weight 4 lb.
BCWBT Body-Pack Transmitter:
Carrier Frequency
Ch. A: 2.0 MHz; or Ch. B: 2.6 MHz
Audio Input BCBM Body-Pack Omni-directional Condenser
BCLM Lavaliere-type Omni-directional Condenser
BCHM Headset-type Uni-directional Condenser
Controls ON/OFF Switch, Volume Control, Ch. A/B Select
Switch
Connectors 3.5 mm Locking Jack (MIC connection); DC Input
Charge Jack
Power Requirements 2 AA Batteries (2.4V DC)
Optional Rechargeable Battery Pack BCBRBP*
Optional Battery Charger BCBRA*
Dimensions (W x H x D) 2.6" x 3.9" x
1.7"
Weight (Transmitter) 3.6 oz.
Weight (Headset)
1.1 oz.
BCWHT Handheld Microphone Transmitter:
Carrier Frequency
Ch. B: 2.6 MHz
Audio Input Uni-directional Dynamic Cartridge
Controls ON\OFF Switch
Power Requirements 2 AA Batteries (2.4 V DC)
Optional Rechargeable Battery Pack BCHRBP*
Optional Battery Charger BCBC*
Dimensions (D x Dia.)
10.2" x 2.2"
Weight
14 oz.
* The Rechargeable Battery Packs should only be used with the Battery Chargers listed. Never attempt to
recharge alkaline batteries.
10