Buhler Allied FK314 - Manual (Page 15)

85” Snowblower
HYDRAULIC SNOW CHUTE
NOTE:
Before mounting chute, apply a heavy coating of light grease to chute ring.
1.
Remove spout clamp and mount chute.
2. Mount pivot arm. NOTE: Flat Washers are supplied for height spacer if
required.
3. Connect one end of cable to pivot arm with cable clamp.
4. Wrap cable completely around chute ring. Then return to pivot arm and
connect with cable clamp.
5. Turn chute 90
° from position illustrated so opening of chute is facing
opposite direction of pivot arm.
6. Attach cable to tab with ¼” cable clamp.
7. Connect 8” stroke hydraulic cylinder between hitch and pivot arm.
8. NOTE: A hydraulic cylinder and hose kit to control the spout deflector is
available as an option.
12