Reloop DIGITAL JOCKEY 2 CONTROLLER EDITION - Manual (Page 15)

15
Shift: While holding the shift button and pushing the pitch bend buttons simultaneously when in
browse mode (also see B20) it is possible to open and close folders respectively.
B12. Key Lock Button
By activating the Key Lock Button the tone pitch will be disabled. This way the original tone pitch
will be kept when changing the track‘s speed.
Shift: Master Button. By pushing this button it is possible to choose one deck as master.
B13. Sync Button
By pushing the Sync Button the corresponding deck‘s pitch will be synchronized.
Shift: Sync function for Deck C/D.
[Traktor PRO]
B14. Cue Button
Via this button the monitoring function for the respective deck will be activated.
Shift: Preview function. With this button you can monitor a track from the browser without having
to load it via the player.
B15. Shift Button
With this button it is possible to access a contoller element‘s second function. On the controller‘s
surface all shift functions are displayed in white captions.
B16. Gain Knob
With the gain knob you can adjust a track‘s volume.
B17. High Knob
With this knob you can adjust the high frequencies.
Pushing the High Knob: High Kill function. By pushing the High Knob you can filter out the high
frequencies.
Shift: Filter function. While additionally holding the shift button a filter can be modulated.
Shift & Pushing the High Knob: Filter On. By simultaneously holding the shift button and pushing
the High Knob you will activate the filter.
B18. Mid Knob
With this knob you can adjust the mid frequencies.
Pushing the Mid Knob: Mid Kill function. By pushing the Mid Knob you can filter out the mid fre-
quencies.
Shift: Key function. While additionally holding the shift button the tone pitch can be adjusted.
Shift & Pushing the Mid Knob: Key On. By simultaneously holding the shift button and pushing
the Mid Knob you will activate the key function.
B19. Low Knob
With this knob ou can adjust the low frequencies.
Pushing the Low Knob: Low Kill. By pushing the Low Knob you can filter the bass frequencies.
Shift: Pan function. While additionally holding the shift button it is possible to adjust the pan
value (balance).
[Traktor PRO]
Shift & Pushing the Low Knob: By simultaneously holding the shift button and pushing the Low
Knob you will activate the Pan function.
B20. Trax Encoder
With the Trax Encoder it is possible to navigate through the tracklist.
NOTE BROWSE MODE!
By pushing the Trax Encoder the Browse Mode will be activated. In Browse Mode you can navi-
gate through the tree structure by using the left jog wheel. The right jog wheel can be used in
order to navigate through the track list. By pushing the shift and pitch bend buttons +/- you
can open and close chosen folders respectively. By pushing the Trax Encoder once more you
will exit Browse Mode.
Shift: Folder Search. By holding the shift button and turning the Trax Encoder you can change
between folders.
B21. Load A/B Button
In order to load a track onto a desired player push the Load A for the left and Load B for the right
player.
Shift: Load C/D. In order to load a track onto a desired player push the Load C for the left and
Load D for the right player.
[Traktor PRO]
B22. Loop In/Set Cue Button
By pushing the Loop In button you will set the starting point of a manual loop. Simultaneously a
cue point will be set.
Shift: Loop In Deck C/D. Here you can set a loop in point for deck C/D.
[Traktor PRO]
B23. Loop Out/Reloop Button
Push the loop out button in order to set a loop ending point. Now the player will change to loop
mode. By pushing the loop out button again you will leave the loop out mode. When pushing the
loop out button in playback mode you will call up a previously set manual loop (Reloop).
Shift: Loop Out C/D. Setting a loop out point for deck C/D.
[Traktor PRO]
ENGLISH