Reloop SPIN! - Manual (Page 60)

1.4 First software steps
Following, the first necessary steps in order to be able to work with the Spin!
software will be explained.
NOTE!
The manual can be found following the menu > Help > Manual
a) Importing music
First import all your music to the Spin! library. To do so go to the menu item
> Spin! library > Auto search.
It is possible to either search single files or directories automatically for music.
Confirm your choice with „OK“.
b) Loading tracks
After having imported all your music you can load single tracks into player 1 and
2. There are three possibilities to do so:
• Via mouse
Use the drag & drop function in order to load tracks.
• Via Trax select
On the Spin! timecode record's B-side the last groove has been conceived for
searching tracks. Drop the needle on this groove in order to browse the Spin!
library. Stop the record at the desired track and put the needle back to the
beginning of the record in order to load the desired track.
• Via keyboard
Activate the Spin! library via the hot key „V“. Browse the Spin! library with
the up/down cursors to the desired track and push the enter key in order to
load this track. The active player can be selected via the TAB key.
c) Activating the timecode mode
Activate the timecode mode via the „Vinyl“ button, right below the label monitor.
Now you can start mixing!
60
ENGLISH