Replay XD 1080Mini - Manual (Page 7)

A LI G N M EN T
There are a few references for accurately aiming and aligning your Replay XD 1080 Mini.
1. The Start and REC button should always point up or at the 12 o’clock position for a level horizon.
2. The front silver sight markers are horizontal and vertical which act as a level.
3. The laser etched marks on the side of the Replay XD 1080 Mini are spaced every 15 degrees to give you fine
adjustment.
4. To make sure you are aiming your Replay XD 1080 Mini in the desired direction, simply look down the length of
the housing from the rear–forward as if you’re looking through a telescope. It’s that easy.
12
9
6
3