Revel B112 - Manual (Page 9)

9 B112/B110 Subwoofer
Quick Start Guide
TRIggER AND POwER CONNECTIONS
Trigger In/Out Connectors
If you want your subwoofer(s) to turn on along with another component
that supplies a trigger voltage, use a mono 3.5mm cable (not supplied)
to connect the 12V DC Trigger In connector to the trigger voltage out
connector of the other component.
To supply a trigger signal to an additional Performa3 subwoofer (or
other triggerable device), use a mono 3.5mm cable (not supplied)
to connect the 12V DC Trigger Out connector of the first Performa3
subwoofer to the 12V DC Trigger In connector of the next Performa3
subwoofer. Connect additional Performa3 subwoofers this way, in
“daisy-chain” fashion.
NOTe: When using the 12V DC Trigger connectors, set the
subwoofers’ Power Mode switches in the “Trigger” position.
Power Cord
After you have ensured that all connections have been correctly made,
plug the supplied power cord into the subwoofer’s Power Cord connector
and into a working unswitched AC power outlet.
B112/B110
Connectors
B112/B110
Power Cord
Connector
AC Power
Outlet
Power Cord
(supplied)
To 5V – 12V
Trigger Source
To “Trigger In”
Connector on Additional
Performa3 Subwoofer