Revel Salon 2 - Manual (Page 7)

Ultima Salon2/Studio2
Owner’s Manual 5
6. Tilt the cabinet forward and remove the bottom pad, using
caution to avoid touching the tweeter or midrange, Figure 1,
Step 3.
7. Carefully remove the tape from the red protective tweeter
cover.
8. We recommend installing the spikes/glides after determining
final speaker placement. Refer to the “Combination spikes/
glides” section or more info.
After unpacking the unit, carefully inspect the contents. If you
discover any damage, immediately contact your Revel dealer for
further assistance. To move an unpacked loudspeaker, rock it
side-to-side into place, using caution to avoid touching the
tweeter and midrange.
Keep all packing materials for future shipping.
In the unlikely event a product will need repair. Revel will only
accept a unit in its original shipping carton. Using any other
packing materials may result in damage to the product and will
void the warranty. See Service Information for additional details.
Figure 1: Unpacking Instructions
Caution
Use caution not to touch or allow any object or liquid to come
in contact with the Beryllium tweeter dome. Variations in its
finish are normal. Any attempt to clean the tweeter dome will
result in damage, which is not covered under the limited
warranty.
1
2
3
2