Revel W780 - Manual (Page 6)

6 In-Wall Architectural Loudspeaker
Instruction Manual
2. Determine the correct speaker location and use the template included
with the speaker to mark the wall material.
3. Cut the drywall along the mark you made in Step 2 to create the
mounting opening.
4. Connect the speaker to the amplifier as explained in Connecting to the
Amplifier, on page 5.
5. Make sure all tool-less clamps are in their locked and “ready-to-
mount” position.
Tool-Less Clamps in
Ready-to-Mount
Position
6. Using two hands, carefully insert the speaker into the mounting
opening, pressing evenly around the baffle. Ensure that all the tool-
less mounting clamps are in their locked, ready-to-mount position
and that none have accidentally been pushed outside the mounting
opening. As you insert the speaker, the clamps will rotate into the
locking position and will firmly clamp the speaker into the mounting
opening.
IMPORTANT: Be sure to insert the speaker straight into
the opening. Do not tilt the speaker while inserting it.
Use Both Hands to
Insert Speaker
Straight Into
Mounting Cut-Out
All Clamps
Inside
Mounting
Cut-Out
7. Attach the supplied grille. Powerful magnets in the speaker frame will
securely hold the grille in place. Be sure that it is attached evenly, and
that the edges of the grille extend over the baffle on all sides.
Attach Supplied Grille