Revel I30 Back Box User Manual
Page 5
5
IMPORTANT SAFETY INSTRUCTIONS
Read Before Starting Installation
WARNING
This enclosure is not listed for use in air handling plenums. Installation
of this enclosure in walls or ceilings of fire barrier rated construction
require that construction methods shall be employed in order to comply
with local building or life safety codes. Consult your local Authority
Having Jurisdiction (Building, Electrical, or Fire Safety Inspector) to
determine what acceptable construction methods will be required.
WARNING
The I20 Inwall Back Box weighs 19 lbs. (8.6kg) empty, and weighs 32
lbs. (14.52kg) with an I20 speaker system installed in it. The I30 Inwall
Back Box weighs 19 lbs. (8.6kg) empty, and weighs 36 lbs. (16.3kg) with
an I30 speaker system installed in it.
ANSI/EIA 636 Recommended Loudspeaker Safety Practices, Section 16.3
recommends that the mounting system used to install the Inwall Back
Box in walls or ceilings should support the weight of the product plus at
least four times the weight of the product being installed. That means,
for an I30 installed in an Inwall Back Box, the mounting system should
be able to support at least 180 lbs. (82kg).
It is strongly recommended that the installer consult a construction pro-
fessional or a professional engineer to determine the appropriate
mounting methods to be used for each specific installation location.
REVEL I20/I30 Back Box
Installation Instructions