Revel M20 - Manual (Page 15)

Figure 12. How to connect the
REVEL PERFORMA M20
loudspeaker in a
single-wired system.
Figure 13. Locations of the
PLACEMENT COMPENSA-
TION CONTROL and
TWEETER LEVEL
CONTROL along with their
initial settings for the REVEL
PERFORMA M20 loudspeaker.
SYSTEM OPTIMIZATION
1. After connecting the REVEL PERFORMA M20 loudspeakers,
initially set the TWEETER LEVEL CONTROL on both rear
panels to the “0” position, as shown in Figure 13.
2. Initially set each PLACEMENT COMPENSATION control
(see Figure 13) to match the application as follows:
• Use the Flush Mounted setting when the loudspeakers are
flush-mounted in a wall or custom-built “media wall”, or are
placed on bookshelves.
• Use the Stand Mounted setting when the loudspeakers are
placed on their (optional) stands.
REVEL PERFORMA M20
Owner’s Manual
15
+1 -1 0 +.5 -.5
Tweeter Level (dB)
Stand
Mounted Flush Mounted
Revel
Northridge, California
Made in U.S.A.
Serial Number
Placement
Compensation
(See Owner's Manual)
xxxx
+1 -1
0 +.5 -.5
Tweeter Level (dB)
Stand
Mounted Flush
Mounted
Revel
Northridge, California
Made in U.S.A.
Serial Number
Placement
Compensation
(See Owner's Manual)
xxxx
red blk
REVEL
PERFORMA
M20
Rear
Connector Panel
Amplifier
(rear)
(one channel shown)
+1 -1 0 +.5 -.5
Tweeter Level (dB)
Stand
Mounted Flush Mounted
Revel
Northridge, California
Made in U.S.A.
Serial Number
Placement
Compensation
(See Owner's Manual)
xxxx
+1 -1
0 +.5 -.5
Tweeter Level (dB)
Stand
Mounted Flush
Mounted
Revel
Northridge, California
Made in U.S.A.
Serial Number
Placement
Compensation
(See Owner's Manual)
xxxx
Connector
Panel
Set TWEETER LEVEL
Control To “0”
REVEL
PERFORMA
M20
Rear
Set PLACEMENT
COMPENSATION
Control To Match
M20 Placement