Richter SCK-S - Manual (Page 2)

Series MNK-S, MNK-SB, SCK-S, “Self-priming“ design Page 2
9230-062-en Revision 02
TM 6566 Edition 08/2006
List of Contents
List of Contents ........................................ 2
Relevant documents................................. 2
1 Technical data...................................... 3
1.1 Intended use................................................ 3
1.2 Tightening torques....................................... 5
1.3 Type plate.................................................... 5
2 Safety, transport, storage and disposal
5
3 Product description............................. 5
3.1 Mode of operation ....................................... 5
3.2 Field of application ...................................... 6
3.3 Application limits.......................................... 6
4 Installation............................................ 7
4.1 Safety requirements .................................... 7
4.1.1 Emptying of waste-water basins 7
4.1.2 Emptying with overflow 7
5 Commissioning / Shutdown................ 7
5.1 Initial commissioning ................................... 7
5.1.1 Filling the pump housing 7
5.1.2 Checking the direction of rotation 8
5.1.3 Start-up 8
5.2 Shutdown .................................................... 8
5.3 Restarting .................................................... 8
5.4 Improper operation s and their consequences
................................................................. 8
6 Maintenance......................................... 9
6.1 Notes on dismantling................................... 9
6.2 Slide-in unit.................................................. 9
6.3 Emptying...................................................... 9
6.4 Cleaning ...................................................... 9
6.5 Dismantling.................................................. 9
6.5.1 Slide-in unit and impeller 9
6.5.2 Volute housing 9
6.5.3 Seat 9
6.5.4 Draining cover 9
6.5.5 Inlet ring 10
6.5.6 Discharge pipe 10
6.5.7 Storage of the components 10
6.6 Assembly ................................................... 10
7 Faults .................................................. 10
8 Sectional drawing self-priming
housing............................................... 11
Relevant documents
This supplementary installation and operating manual
is only valid in conjunction with these installation and
operating manuals: MNK long-life grease lubrication 9230-050-en
MNK oil bath lubrication 9230-051-en
MNK-B close-coupled design 9230-055-en
SCK long-life grease lubrication 9220-050-en
SCK oil bath lubrication 9220-055-en